Freestater1922

Hello everyone,

I'm new to this forum and joined because I hoped somebody on here could help me out with an annoying problem. I have a Modern Warfare 2 Bluetooth headset

I used it for a few months, but then lent it to my friend who has had it for a long time. I recnelty got it back off of him, but I cant for the life of me figure out how to pair it to the ps3. I lost the manual for it. I'm sure theres loads of people on this website who use the same Mic, and I'm hoping you can tell me how to pair it. Nothing I do seems to work. I went into bluetooth management, scanned for new devices etc.

I'm just Unaware of what button/s Im meant to hold down for how long etc. It's very annoying. Thanks in advance.

Freestater1922

Em...once again really in need of help here...please somebody respond.

Fr0stByte

found this online....its for the madcatz mw2 headset

according to the manual, you need to hold the headset call button for at least 8 seconds. The headset led will alternate from blue to red when it is ready to be paired. Sounds to me that you aren't holding the button long enough. Instructions from manual listed below. Hope this helps

1. Power ON your PS3 console.
2. Within the “Settings” menu, press X on “Accessory Settings.”
3. Press X on the icon labeled: “Manage Bluetooth Devices.”
4. Press X on “Yes” to pair (register) the headset with the PS3 system.
5. Ensure the USB Charge Cable is unplugged.
6. Once at the next screen, prepare the Headset to be paired with the PS3
by holding down the Call button for 8 seconds.
7. Once the Headset’s LED indicator is alternately flashing Blue and Red
(indicating the Headset is ready to be paired), press X on “Start
Scanning.” (if another device is paired or you are going through the
pairing process again, choose “Yes” to overwrite the currently
registered device and then choose “Start Scanning”)
8. Once Scan is complete, the PS3 will recognize all Bluetooth devices
within range.
9. Locate “8860E” from the list of available devices and press X on its icon
to be prompted for a Pass Key.
10. Enter 0000 (four zeros) as the Pass Key and press X on OK.
11. Press O twice to go back two screens. Press X on the “Audio Device
Settings” icon. Press X on the “Input Device” icon and select “8860E”
a. The voice meter will fluctuate when the Headset is active. This
indicates the Headset is connected.
b. Set the Microphone level to 1 to eliminate feedback.
c. This will complete the pairing process.
12. When changing games or resetting the console, go to the “Audio Device
Settings” menu and ensure the Headset is being detected before
starting the game. If it’s not being detected, repeat step 11 (eleven)